HP Designjet Z6100 Plotter Reparatur
Ersatzteile, Verkauf, Fehler – Hamburg
Für Fehler wie 86:01, 02.1:10, 21:, 41:, 42:, 42:10, 79:04
Im Großraum Hamburg und Norddeutschland reparieren wir gerne bei Ihnen vor Ort und haben die Ersatzteile im Werkstattwagen.
Eine Kostenorientierung finden Sie auf unserer Startseite.
Bitte nehmen Sie Kontakt mit uns auf.
Teileliste |
 |
Weitere Teile auf Anfrage
Für die Drucker/Plotter dieser HP Designjet Modellreihe haben wir ein umfangreiches Ersatzteilsortiment auf Lager, auch viele nicht aufgelistete Teile.
|
HP DesignJet Z6100(ps) 1067 mm — 42" (Modelnummern:
Q6651A) HP DesignJet Z6100ps 1524 mm — 60" (Modelnummern: Q6654A) |
||
|---|---|---|
| Q1273-60240 |
HP Display und Kabel MR Serv*2 — HP Front Panel and Cable MR Serv |
€ auf Anfrage*1 |
|
Q6651-60068 Q6651-60065 (alt) |
HP Festplatten-Set, inkl. Halter und Schrauben*2 — HP Hard Disk Drive Assembly, incl. Holder and Screws |
€ auf Anfrage*1 |
| Q1271-60160 |
HP CPU Lüfter-Set*2 — HP CPU Fan Assembly |
€ auf Anfrage*1 |
| Q1273-69251 |
HP Netzteil*2 — HP Power Supply Unit (PSU) |
€ auf Anfrage*1 |
| Q6651-60349 |
HP Printmech PCA Serv*2 — HP Printmech PCA Serv |
€ auf Anfrage*1 |
| Q6651-60056 |
HP Interconnect PCA Serv*2 — HP Interconnect PCA Serv |
€ auf Anfrage*1 |
| Version 1067 mm — 42" | ||
| CQ109-67004 |
HP Zahnriemen und Spanner-Set (1067 mm, original HP)*2 — HP Belt and Tension Kit (42", original HP) |
€ auf Anfrage*1 |
| Q1273-60239 |
HP Encoder-Set, inkl. Encoder-Streifen und -Sensor (1067 mm)*2 — HP Encoder Kit, incl. Strip and Encoder Sensor (42") |
€ auf Anfrage*1 |
| Q1273-60071 |
HP Druckkopfmotor (1067 mm)*2 — HP Scan Axis Motor (42") |
€ auf Anfrage*1 |
| Version 1524 mm — 60" | ||
| CQ869-67072 |
HP Zahnriemen und Spanner-Set (1524 mm, original HP)*2 — HP Belt and Tensioner Kit (60", original HP) |
€ auf Anfrage*1 |
| Q6652-60148 |
HP Encoder-Set, inkl. Encoder-Streifen und -Sensor (1524 mm)*2 — HP Encoder Kit, incl. Strip and Encoder Sensor (60") |
€ auf Anfrage*1 |
| Q6652-60128 |
HP Druckkopfmotor (1524 mm)*2 — HP Scan Axis Motor (60") |
€ auf Anfrage*1 |
*1 Alle Preise in Deutschland zzgl. USt.. Die angegebenen Preise sind aufgrund der starken Marktpreisschwankungen Richtpreise. Bitte erfragen Sie die aktuellen Preise.
*2 Einbau nur durch geschultes Fachpersonal; ggf. Kalibrierung des Gerätes erforderlich.
Weitere Hersteller und Modelle auf Anfrage.
Vorbehaltlich der Lieferfähigkeit des jeweiligen Herstellers.
| |
Fehler (Error Codes) |
|
Bei Fragen zum Fehler-Code nehmen Sie gerne Kontakt mit unserem Support auf.
|
Fehler-Code — Error Code |
Beschreibung / Empfehlung — Description / Recommendation |
|---|---|
| Designjet Z6100 Fehler 01.0:10 | Main PCA hardware failure. |
| Designjet Z6100 Fehler 01.1:10 | PrintMech PCA hardware failure request a service/repair estimate. |
| Designjet Z6100 Fehler 01.2:10 | ISS Top PCA communication failure. |
| Designjet Z6100 Fehler 01.3:10 | ISS Bottom PCA communication failure. |
| Designjet Z6100 Fehler 02:10 |
There is no signal from the Scan Axis Encoder. Analytics: Scan axis encoder may be wrong. Try to replace it. |
| Designjet Z6100 Fehler 02.1:10 | Carriage PCA communication failure. |
| Designjet Z6100 Fehler 03:10 | Power distribution failure. |
| Designjet Z6100 Fehler 05:10 | Formatter communication failure with ISS. |
| Designjet Z6100 Fehler 05.1:10 | Formatter CPU fan stoped or burnt. |
| Designjet Z6100 Fehler 06:03 | Main NVM communication failure. |
| Designjet Z6100 Fehler 06:10 | Main NVM communication failure. |
| Designjet Z6100 Fehler 08:11 | Front Panel communication failure. |
| Designjet Z6100 Fehler 11:10 | Trailing Cable does not seem to be connected. |
| Designjet Z6100 Fehler 17.0:11 | PrintMech to Interconnect cable does not seem to be connected |
| Designjet Z6100 Fehler 17.1:11 | PrintMech to Interconnect Data 1 cable does not seem to be connected. |
| Designjet Z6100 Fehler 17.2:11 | PrintMech to Interconnect Data 2 cable does not seem to be connected. |
| Designjet Z6100 Fehler 17.3:11 | Main PCA to PrintMech Black 1 cable does not seem to be connected. |
| Designjet Z6100 Fehler 17.4:11 | Main PCA to PrintMech Blue 2 cable does not seem to be connected. |
| Designjet Z6100 Fehler 21:03 | Service Station electrical current limit |
| Designjet Z6100 Fehler 21:13 | Service Station jam. |
| Designjet Z6100 Fehler 23:10 | Air Pressurization System failure; unable to pressurize or depressurize tubes. |
| Designjet Z6100 Fehler 24:03 | Ink Supply Tubes purge failure. |
| Designjet Z6100 Fehler 24:10 | A broken bag has been detected in one of the ink Cartridges. |
| Designjet Z6100 Fehler 24:11 | PrintMech to ISS Top cable does not seem to be connected. |
| Designjet Z6100 Fehler 24.1:11 | ISS Top to ISS Bottom cable does not seem to be connected. |
| Designjet Z6100 Fehler 26.0:01 | Bad contact detected in ISS slot 0 floater. |
| Designjet Z6100 Fehler 26.1:01 | Bad contact detected in ISS slot 1 floater. |
| Designjet Z6100 Fehler 26.2:01 | Bad contact detected in ISS slot 2 floater. |
| Designjet Z6100 Fehler 26.3:01 | Bad contact detected in ISS slot 3 floater. |
| Designjet Z6100 Fehler 26.4:01 | Bad contact detected in ISS slot 4 floater. |
| Designjet Z6100 Fehler 26.5:01 | Bad contact detected in ISS slot 5 floater. |
| Designjet Z6100 Fehler 26.6:01 | Bad contact detected in ISS slot 6 floater. |
| Designjet Z6100 Fehler 26.7:01 | Bad contact detected in ISS slot 7 floater. |
| Designjet Z6100 Fehler 27.1:01 | Calibration failed due to poor performance of the Magenta / Yellow Printhead in slot 1. |
| Designjet Z6100 Fehler 27.2:01 | Calibration failed due to poor performance of the Magenta / Yellow Printhead in slot 2. |
| Designjet Z6100 Fehler 27.3:01 | Calibration failed due to poor performance of the Light Cyan / Light Magenta Printhead slot 3. |
| Designjet Z6100 Fehler 27.4:01 | Calibration failed due to poor performance of the Light Cyan / Light Magenta Printhead in slot 4. |
| Designjet Z6100 Fehler 27.5:01 | Calibration failed due to poor performance of the Photo Black / Light Gray Printhead in slot 5. |
| Designjet Z6100 Fehler 27.6:01 | Calibration failed due to poor performance of the Photo Black / Light Gray Printhead in slot 6. |
| Designjet Z6100 Fehler 27.7:01 | Calibration failed due to poor performance of the Matte Black / Red Printhead in slot 7. |
| Designjet Z6100 Fehler 27.8:01 | Calibration failed due to poor performance of the Matte Black / Red Printhead in slot 8. |
| Designjet Z6100 Fehler 28.1:01 | Magenta / Yellow Printhead in slot 1 is deteriorating. |
| Designjet Z6100 Fehler 28.2:01 | Magenta / Yellow Printhead in slot 2 is deteriorating. |
| Designjet Z6100 Fehler 28.3:01 | Light Cyan / Light Magenta Printhead in slot 3 is deteriorating. |
| Designjet Z6100 Fehler 28.4:01 | Light Cyan / Light Magenta Printhead in slot 4 is deteriorating. |
| Designjet Z6100 Fehler 28.5:01 | Photo Black / Light Gray Printhead in slot 5 is deteriorating. |
| Designjet Z6100 Fehler 28.6:01 | Photo Black / Light Gray Printhead in slot 6 is deteriorating. |
| Designjet Z6100 Fehler 28.7:01 | Matte Black / Red Printhead in slot 7 is deteriorating |
| Designjet Z6100 Fehler 28.8:01 | Matte Black / Red Printhead in slot 8 is deteriorating |
| Designjet Z6100 Fehler 28.1:02 | Magenta / Yellow Printhead in slot 1 nearing the end of it's useful life. |
| Designjet Z6100 Fehler 28.2:02 | Magenta / Yelow Printhead in slot 2 nearing the end of it's useful life. |
| Designjet Z6100 Fehler 28.3:02 | Light Cyan / Light Magenta Printehad in slot 3 nearing the end of it's useful life. |
| Designjet Z6100 Fehler 28.4:02 | Light Cyan / Light Magenta Printehad in slot 4 nearing the end of it's useful life. |
| Designjet Z6100 Fehler 28.5:02 | Phot Black / Light Gray Printhead in slot 5 nearing the end of it's useful life. |
| Designjet Z6100 Fehler 28.6:02 | Photo Black / Light Gray Printhead in slot 6 nearing the end of it's useful life. |
| Designjet Z6100 Fehler 28.7:02 | Matte Black / Red Printhead in slot 7 nearing the end of it's useful life. |
| Designjet Z6100 Fehler 28.8:02 | Matte Black / Red Printhead in slot 8 nearin the end of it's useful life. |
| Designjet Z6100 Fehler 29:00 | Maintenance Cartridge almost full. |
| Designjet Z6100 Fehler 29:01 | Maintenance Catridge not inserted correctly. |
| Designjet Z6100 Fehler 29:02 | Ink Absorber almost full. |
| Designjet Z6100 Fehler 32:01 | Take-up Reel (TUR) communication failure. |
| Designjet Z6100 Fehler 32:01.1 | Take-up Reel (TUR) early paper jam. |
| Designjet Z6100 Fehler 32:01.2 | Take-up Reel (TUR) paper jam. |
| Designjet Z6100 Fehler 32:01.9 | Take-up Reel (TUR) disabled because paper was removed unexpectedly. |
| Designjet Z6100 Fehler 32:02 | Take-up Reel (TUR) not detected or disconnected while printer was off. |
| Designjet Z6100 Fehler 36.0:01 | Duplexer communication error. |
| Designjet Z6100 Fehler 36.01:01 | Duplexer paper skew error. |
| Designjet Z6100 Fehler 36.02:01 | Duplexer paper incorrect lateral edge position. |
| Designjet Z6100 Fehler 36.03:01 | Duplexer unable to detect paper. |
| Designjet Z6100 Fehler 36.1:01 | Duplexer not ready for printing. |
| Designjet Z6100 Fehler 36.2:01 | Duplexer internal error. |
| Designjet Z6100 Fehler 41:03 | Paper motor electrical curent limit. |
| Designjet Z6100 Fehler 42:03 | Scan-Axis motor electrical current limit. |
| Designjet Z6100 Fehler 42:10 |
Electrical fault in carriage motor. Possibilities: – The error points to the scan axis motor. What is probably happening, is the printer is sensing too much resistance. Maybe because of less oil on the sliders or after it engages the cutter. It may be that the cutter is dragging and not running properly. Perform a manual form feed and cut through the paper menu and see what happens. If that causes a problem, then start by checking to see if the cutter is seating properly. It is probably cheaper to replace the cutter first, before trying to replace the scan axis motor. – Look if the servicestation set wright in the platen. – The error code is with misplacement of carriage stopper on the right side of plotter. Refix the carriage stopper issue will get resolved. If not check with the latest firmware. – The scan axis motor is faulty and needs to be replaced. – Your problem can be a dirty encoder sensor in the carriage or the strip is damaged in the service station zone. Clean the encoder strip if you have not already. The problem with the cleaning cartridge detection came from is the line sensor. Can be dirty or damaged–check the bottom of the carriage. |
| Designjet Z6100 Fehler 43:01 | Vacuum Fan spinning at wrong speed. |
| Designjet Z6100 Fehler 43:10 | Vacuum Fan failure. |
| Designjet Z6100 Fehler 43.1:10 | Vacuum Driver PCA communication or hardware failure. |
| Designjet Z6100 Fehler 43:11 | Vacuum Fan PCA cable does not seem to be connected. |
| Designjet Z6100 Fehler 44.1:10 | Left Aerosol Fan stopped. |
| Designjet Z6100 Fehler 44.2:10 | Right Aerosol Fan stopped or spinning at lower speed. |
| Designjet Z6100 Fehler 44.4:10 | Right Aerosol Fan Filter blocked. |
| Designjet Z6100 Fehler 45:03 | Rewinder servo shutdown. |
| Designjet Z6100 Fehler 46:03 | Primer servo shutdown. |
| Designjet Z6100 Fehler 46:13 | Primer test distance failed. |
| Designjet Z6100 Fehler 50:03 | OMAS fatal error or disconnected. |
| Designjet Z6100 Fehler 50.1:10 | OMAS Module communication failure. |
| Designjet Z6100 Fehler 50:14 | Firmware version mismatch between the OMAS Controller Card and Hard Disk Drive. |
| Designjet Z6100 Fehler 50.2:10 | OMAS Controller Card communication failure. |
| Designjet Z6100 Fehler 50.3:11 | Main PCA to OMAS Controller cable does not seem to be connected. |
| Designjet Z6100 Fehler 51:10 | Error detected in the Window Position Sensor. |
| Designjet Z6100 Fehler 51.1:10 | Error detected in the Maintenance Cartridge Door Sensor (Service Station Door Sensor). |
| Designjet Z6100 Fehler 52:10 | Drop Detector switch On/Off failure. |
| Designjet Z6100 Fehler 53:10 | Media Sensor error. |
| Designjet Z6100 Fehler 53.1:11 | Media Sensor cable does not seem to be connected. |
| Designjet Z6100 Fehler 54:10 | Media Level Sensor error. |
| Designjet Z6100 Fehler 55:10 | Line Sensor communication failure. |
| Designjet Z6100 Fehler 56:01 | Incorrect readings from paper encoder. |
| Designjet Z6100 Fehler 56:10 | Paper Encoder calibration failed. |
| Designjet Z6100 Fehler 58:01 | Embedded PhotoSpectrometer (ESP) shutter error. |
| Designjet Z6100 Fehler 58:10 | Embedded PhotoSpectrometer (ESP) failure. |
| Designjet Z6100 Fehler 58.1:10 | Embedded PhotoSpectrometer (ESP) Shutter Actuator failure. |
| Designjet Z6100 Fehler 58.2:10 | Embedded PhotoSpectrometer (ESP) Shutter Deactivator failure. |
| Designjet Z6100 Fehler 59.1:09 | Two electrical parts have been replaced at the same time. |
| Designjet Z6100 Fehler 59.2:00 | An unsupported or reused part has been installed. |
| Designjet Z6100 Fehler 60.1:11 | Initialization error. |
| Designjet Z6100 Fehler 60.2:17 | Initialization error. |
| Designjet Z6100 Fehler 61:01 | The file format is incorrect and the printer cannot process the job. |
| Designjet Z6100 Fehler 61:04.1 | The PostScript fonts are missing. |
| Designjet Z6100 Fehler 61:04.2 | PostScript unknown Paper ID. |
| Designjet Z6100 Fehler 61:08 | The paper type specified in the file is incorrect and the printer cannot process the job. |
| Designjet Z6100 Fehler 61:08.1 | The file cannot be printed because it is password-protected. |
| Designjet Z6100 Fehler 61:08.2 | The file contains format errors or incorrect settings and the printer cannot process the job. |
| Designjet Z6100 Fehler 61:10 | A slow computer processing complex files can pause for longer than the default printer timeout, which can be interperted by the printer as an End Of Job, in which case some elements of the job may be lost. |
| Designjet Z6100 Fehler 64.1:01 | The printer does not recognize the USB Hard Disk Drive accessory. |
| Designjet Z6100 Fehler 71:03 | Out of memory failure. |
| Designjet Z6100 Fehler 71:08 | Insufficient display list. |
| Designjet Z6100 Fehler 74:01 | Error uploading firmware update file. |
| Designjet Z6100 Fehler 75.21:10 | Total printer ink consumption reached upper limit. |
| Designjet Z6100 Fehler 76:03 | Hard Disk Drive out of Space. |
| Designjet Z6100 Fehler 77:04 | Embedded Web Server internal software error. |
| Designjet Z6100 Fehler 78.1:04 | Media Settings area missing in media settings file. |
| Designjet Z6100 Fehler 79:03 | Generic firmware error. |
| Designjet Z6100 Fehler 79:04 | Generic firmware error. |
| Designjet Z6100 Fehler 79.2:04 | Operating-system signal error. |
| Designjet Z6100 Fehler 81:01 | Paper servo shutdown; possible paper jam. |
| Designjet Z6100 Fehler 85:03 | Problem finding the Drive Roller zero. |
| Designjet Z6100 Fehler 86:01 |
Carriage servo shutdown; possible paper jam. Analytics: Can be a bad the carriage belt, than replace it. If no problem can be found proceed the Service Tests (Diagnostics): Scan Axis Test. |
| Designjet Z6100 Fehler 86:11 | Scan-Axis length requires too much force or energy. |
| Designjet Z6100 Fehler 87:01 | Problem with the Scan Axis encoder sensor readings. |
| Designjet Z6100 Fehler 87:10 | Problem with the Carriage Encoder Sensor readings. |
| Designjet Z6100 Fehler 94:01 | The paper is not suitable for colour calibration, being too dark (low L), or too coloured (a or b above thresholds), or transparent. |
| Designjet Z6100 Fehler 94:02 | Colour calibration error, some of the consistency checks on the Embedded SpectroPhotometer (ESP) measurements failed, which could have several causes. |
| Designjet Z6100 Fehler 94:10 | Embedded SpectroPhotometer (ESP) contaminated by aerosol. |
| |
