HP Designjet 2000, 2500, 2800, 3000, 3500, 3800 Plotter Reparatur
Ersatzteile, Verkauf, Fehler — Hamburg


Im Großraum Hamburg und Norddeutschland reparieren wir gerne bei Ihnen vor Ort und haben die Ersatzteile im Werkstattwagen. Eine Kostenorientierung finden Sie auf unserer Startseite.
Bitte nehmen Sie Kontakt mit uns auf.


Teileliste

ausblenden

Weitere Teile auf Anfrage

Für die Drucker/Plotter dieser HP Designjet Modellreihe haben wir ein umfangreiches Ersatzteilsortiment auf Lager, auch viele nicht aufgelistete Teile.


HP DesignJet 2000 CP A0 — 36" (Modelnummern: C4703A)
HP DesignJet 2500 CP PostScript A0 — 36" (Modelnummern: C4704A)
HP DesignJet 2800 CP A0 — 36" (Modelnummern: C6085A)
HP DesignJet 3000 CP 137cm — 54" (Modelnummern: C4723A)
HP DesignJet 3500 CP PostScript 137cm — 54" (Modelnummern: C4724A)
HP DesignJet 3800 CP 137cm — 54" (Modelnummern: C6084A)
Version A0 — 36"
C4704-60207 HP Zahnriemen für Druckkopfschlitten (A0, original HP)*2
— HP Carriage Belt (36", original HP)
€ auf Anfrage*1
Version 137cm — 54"
C4723-60235 HP Zahnriemen für Druckkopfschlitten (137cm, original HP)*2
— HP Carriage Belt (54", original HP)
€ auf Anfrage*1

*1 Alle Preise in Deutschland zzgl. USt.. Die angegebenen Preise sind aufgrund der starken Marktpreisschwankungen Richtpreise. Bitte erfragen Sie die aktuellen Preise.
*2 Einbau nur durch geschultes Fachpersonal; ggf. Kalibrierung des Gerätes erforderlich.


Weitere Hersteller und Modelle auf Anfrage.
Vorbehaltlich der Lieferfähigkeit des jeweiligen Herstellers.

ausblenden

Fehler (Error Codes)

ausblenden

Bei Fragen zum Fehler-Code nehmen Sie gerne Kontakt mit unserem Support auf.


Fehler-Code
— Error Code
Beschreibung / Empfehlung
— Description / Recommendation
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010020 (DJ 2000) The CheckSum Read On The Flash SIMM Is Incorrect.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010021 (DJ 2000) The Base DRAM Or The RAM SIMM Tests Failed.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010022 (DJ 2000) The SWATH RAM Test Failed.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010023 (DJ 2000) A Fuse On The Main PCA Has Blown.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010025 (DJ 2000) Problem Initializing The Encoder Pulse Generator.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010030 (DJ 2000) One Of The Two Interconnect Boards Not Detected.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010031 (DJ 2000) The Printhead Primitive Driver ASIC Test Failed.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010032 (DJ 2000) Fan Test Failed - Current Not Detected In One Or Both Fans.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010033 (DJ 2000) The DC Motor ASIC Test Failed.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010034 (DJ 2000) One Of The DC Motor Has Failed.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010035 (DJ 2000) One Of The Stepper Motors Has Failed.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010036 (DJ 2000) ADC Test Failure In The Main PCA.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010037 (DJ 2000) ADC Test Failure In The Carriage PCA.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010038 (DJ 2000) A Printhead Voltage Could Not Be Set - Main PCA Failure.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010039 (DJ 2000) A Printhead Voltage Could Not Be Set - Carriage PCA Failure.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010040 (DJ 2000) The Ambient Temperature Measured Is Out Of The Normal Range.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010041 (DJ 2000) Problem In Setting The Printhead Voltage.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010042 (DJ 2000) The Status Of One Of The Optical Sensors Is Not Stable When It Should Be.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010100 (DJ 2000) Error Reading In The EEROM.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010101 (DJ 2000) An Action Outside The EEROM Limits Has Been Performed.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010102 (DJ 2000) Physical EEROM Write And/Or Write Operations Failed. The EEROM Data That Is Written Does Not Match The Data That Is Read.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010110 (DJ 2000) The Content Of The Permanent Configuration Area Of The EEROM Is Not Valid When The Printer Is initialised In Service Mode.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010111 (DJ 2000) The Content Of The User Configuration Area EEROM Is Not Valid When The Printer Is initialised.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010120 (DJ 2000) The Content Of The Permanent Configuration Area Of The EERom Is Not Valid When Printer Is initialised In Normal Mode.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010121 (DJ 2000) One Of The Banks Of The User Area Was Corrupted While Writing Or Reading In That Area.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 020000 (DJ 2000) Error In Finding The Primer Home Position.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 020001 (DJ 2000) Error In Finding The Elevator Home Position.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 020002 (DJ 2000) Error In Finding The Refill Arm Home Position.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 020003 (DJ 2000) Error In Finding The refill Stepper Motor Home Position.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 020004 (DJ 2000) Error In Finding The Service Station Home Position.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 020005 (DJ 2000) Elevator Has A Problem Reaching A Desired Position.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 020006 (DJ 2000) The Refill Position In The Y-axis In Not Calibrated.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 020010 (DJ 2000) Problem With Fine Movement of The Y-Axis Motor.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 020011 (DJ 2000) Error During Initialization Of The Y-Axis.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 040xxx (DJ 2000) MIO Card Error.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 040601 (DJ 2000) The MIO Card Does Not Support The MIO 6 Protocol Cards With Vision 5 Or Below Can Not Be Used With The Plotter. Version 5.1 Cards Behave As Expected But Does Not Support PML Intructions.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 050000 (DJ 2000) The Line Sensor Has Problems Finding The Mark Encoder.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 060000 (DJ 2000) The Line Sensor Is Not Functioning Properly Because There Is To Much Ambient Light.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 060200 (DJ 2000) Incompatible Firmware And Carriage PCA.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 060399 (DJ 2000) Incompatible Firmware And Line Sensor.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 07xxxx (DJ 2000) Firmware Error.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 08xxxx (DJ 2000) PostScript Error.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 080001 (DJ 2000) Hard Disk Drive Installed Without PostScript.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 09xxxx (DJ 2000) Problem With The Hard Disk.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 09004 (DJ 2000) PostScript Installed Without The Hard Disk Drive.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010020 (DJ 2500) The CheckSum Read On The Flash SIMM Is Incorrect.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010021 (DJ 2500) The Base DRAM Or The RAM SIMM Tests Failed.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010022 (DJ 2500) The SWATH RAM Test Failed.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010023 (DJ 2500) A Fuse On The Main PCA Has Blown.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010025 (DJ 2500) Problem Initializing The Encoder Pulse Generator.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010030 (DJ 2500) One Of The Two Interconnect Boards Not Detected.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010031 (DJ 2500) The Printhead Primitive Driver ASIC Test Failed.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010032 (DJ 2500) Fan Test Failed - Current Not Detected In One Or Both Fans.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010033 (DJ 2500) The DC Motor ASIC Test Failed.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010034 (DJ 2500) One Of The DC Motor Has Failed.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010035 (DJ 2500) One Of The Stepper Motors Has Failed.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010036 (DJ 2500) ADC Test Failure In The Main PCA.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010037 (DJ 2500) ADC Test Failure In The Carriage PCA.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010038 (DJ 2500) A Printhead Voltage Could Not Be Set - Main PCA Failure.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010039 (DJ 2500) A Printhead Voltage Could Not Be Set - Carriage PCA Failure.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010040 (DJ 2500) The Ambient Temperature Measured Is Out Of The Normal Range.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010041 (DJ 2500) Problem In Setting The Printhead Voltage.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010042 (DJ 2500) The Status Of One Of The Optical Sensors Is Not Stable When It Should Be.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010100 (DJ 2500) Error Reading In The EEROM.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010101 (DJ 2500) An Action Outside The EEROM Limits Has Been Performed.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010102 (DJ 2500) Physical EEROM Write And/Or Write Operations Failed. The EEROM Data That Is Written Does Not Match The Data That Is Read.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010110 (DJ 2500) The Content Of The Permanent Configuration Area Of The EEROM Is Not Valid When The Printer Is Initialised In Service Mode.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010111 (DJ 2500) The Content Of The User Configuration Area EEROM Is Not Valid When The Printer Is initialised.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010120 (DJ 2500) The Content Of The Permanent Configuration Area Of The EERom Is Not Valid When Printer Is initialised In Normal Mode.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010121 (DJ 2500) One Of The Banks Of The User Area Was Corrupted While Writing Or Reading In That Area.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 025000 (DJ 2500) Error In Finding The Primer Home Position.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 025001 (DJ 2500) Error In Finding The Elevator Home Position.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 025002 (DJ 2500) Error In Finding The Refill Arm Home Position.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 025003 (DJ 2500) Error In Finding The refill Stepper Motor Home Position.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 025004 (DJ 2500) Error In Finding The Service Station Home Position.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 025005 (DJ 2500) Elevator Has A Problem Reaching A Desired Position.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 025006 (DJ 2500) The Refill Position In The Y-axis In Not Calibrated.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 020010 (DJ 2500) Problem With Fine Movement of The Y-Axis Motor.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 020011 (DJ 2500) Error During Initialization Of The Y-Axis.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 040xxx (DJ 2500) MIO Card Error.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 040601 (DJ 2500) The MIO Card Does Not Support The MIO 6 Protocol Cards With Vision 5 Or Below Can Not Be Used With The Plotter. Version 5.1 Cards Behave As Expected But Does Not Support PML Intructions.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 050000 (DJ 2500) The Line Sensor Has Problems Finding The Mark Encoder.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 060000 (DJ 2500) The Line Sensor Is Not Functioning Properly Because There Is Too Much Ambient Light.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 060200 (DJ 2500) Incompatible Firmware And Carriage PCA.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 060399 (DJ 2500) Incompatible Firmware And Line Sensor.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 07xxxx (DJ 2500) Firmware Error.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 08xxxx (DJ 2500) PostScript Error.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 080001 (DJ 2500) Hard Disk Drive Installed Without PostScript.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 09xxxx (DJ 2500) Problem With The Hard Disk.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 09004 (DJ 2500) PostScript Installed Without The Hard Disk Drive.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010020 (DJ 3000) The CheckSum Read On The Flash SIMM Is Incorrect.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010021 (DJ 3000) The Base DRAM Or The RAM SIMM Tests Failed.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010022 (DJ 3000) The SWATH RAM Test Failed.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010023 (DJ 3000) A Fuse On The Main PCA Has Blown.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010025 (DJ 3000) Problem Initializing The Encoder Pulse Generator.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010030 (DJ 3000) One Of The Two Interconnect Boards Not Detected.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010031 (DJ 3000) The Printhead Primitive Driver ASIC Test Failed.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010032 (DJ 3000) Fan Test Failed - Current Not Detected In One Or Both Fans.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010033 (DJ 3000) The DC Motor ASIC Test Failed.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010034 (DJ 3000) One Of The DC Motor Has Failed.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010035 (DJ 3000) One Of The Stepper Motors Has Failed.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010036 (DJ 3000) ADC Test Failure In The Main PCA.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010037 (DJ 3000) ADC Test Failure In The Carriage PCA.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010038 (DJ 3000) A Printhead Voltage Could Not Be Set - Main PCA Failure.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010039 (DJ 3000) A Printhead Voltage Could Not Be Set - Carriage PCA Failure.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010040 (DJ 3000) The Ambient Temperature Measured Is Out Of The Normal Range.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010041 (DJ 3000) Problem In Setting The Printhead Voltage.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010042 (DJ 3000) The Status Of One Of The Optical Sensors Is Not Stable When It Should Be.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010100 (DJ 3000) Error Reading In The EEROM.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010101 (DJ 3000) An Action Outside The EEROM Limits Has Been Performed.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010102 (DJ 3000) Physical EEROM Write And/Or Write Operations Failed. The EEROM Data That Is Written Does Not Match The Data That Is Read.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010110 (DJ 3000) The Content Of The Permanent Configuration Area Of The EEROM Is Not Valid When The Printer Is initialised In Service Mode.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010111 (DJ 3000) The Content Of The User Configuration Area EEROM Is Not Valid When The Printer Is initialised.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010120 (DJ 3000) The Content Of The Permanent Configuration Area Of The EERom Is Not Valid When Printer Is initialised In Normal Mode.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010121 (DJ 3000) One Of The Banks Of The User Area Was Corrupted While Writing Or Reading In That Area.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 030000 (DJ 3000) Error In Finding The Primer Home Position.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 030001 (DJ 3000) Error In Finding The Elevator Home Position.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 030002 (DJ 3000) Error In Finding The Refill Arm Home Position.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 030003 (DJ 3000) Error In Finding The refill Stepper Motor Home Position.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 030004 (DJ 3000) Error In Finding The Service Station Home Position.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 030005 (DJ 3000) Elevator Has A Problem Reaching A Desired Position.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 030006 (DJ 3000) The Refill Position In The Y-axis In Not Calibrated.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 020010 (DJ 3000) Problem With Fine Movement of The Y-Axis Motor.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 020011 (DJ 3000) Error During Initialization Of The Y-Axis.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 040xxx (DJ 3000) MIO Card Error.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 040601 (DJ 3000) The MIO Card Does Not Support The MIO 6 Protocol Cards With Vision 5 Or Below Can Not Be Used With The Plotter. Version 5.1 Cards Behave As Expected But Does Not Support PML Instructions.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 050000 (DJ 3000) The Line Sensor Has Problems Finding The Mark Encoder.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 060000 (DJ 3000) The Line Sensor Is Not Functioning Properly Because There Is To Much Ambient Light.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 060200 (DJ 3000) Incompatible Firmware And Carriage PCA.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 060399 (DJ 3000) Incompatible Firmware And Line Sensor.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 07xxxx (DJ 3000) Firmware Error.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 08xxxx (DJ 3000) PostScript Error.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 080001 (DJ 3000) Hard Disk Drive Installed Without PostScript.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 09xxxx (DJ 3000) Problem With The Hard Disk.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 09004 (DJ 3000) PostScript Installed Without The Hard Disk Drive.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010020 (DJ 3500) The CheckSum Read On The Flash SIMM Is Incorrect.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010021 (DJ 3500) The Base DRAM Or The RAM SIMM Tests Failed.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010022 (DJ 3500) The SWATH RAM Test Failed.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010023 (DJ 3500) A Fuse On The Main PCA Has Blown.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010025 (DJ 3500) Problem Initializing The Encoder Pulse Generator.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010030 (DJ 3500) One Of The Two Interconnect Boards Not Detected.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010031 (DJ 3500) The Printhead Primitive Driver ASIC Test Failed.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010032 (DJ 3500) Fan Test Failed - Current Not Detected In One Or Both Fans.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010033 (DJ 3500) The DC Motor ASIC Test Failed.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010034 (DJ 3500) One Of The DC Motor Has Failed.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010035 (DJ 3500) One Of The Stepper Motors Has Failed.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010036 (DJ 3500) ADC Test Failure In The Main PCA.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010037 (DJ 3500) ADC Test Failure In The Carriage PCA.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010038 (DJ 3500) A Printhead Voltage Could Not Be Set - Main PCA Failure.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010039 (DJ 3500) A Printhead Voltage Could Not Be Set - Carriage PCA Failure.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010040 (DJ 3500) The Ambient Temperature Measured Is Out Of The Normal Range.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010041 (DJ 3500) Problem In Setting The Printhead Voltage.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010042 (DJ 3500) The Status Of One Of The Optical Sensors Is Not Stable When It Should Be.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010100 (DJ 3500) Error Reading In The EEROM.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010101 (DJ 3500) An Action Outside The EEROM Limits Has Been Performed.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010102 (DJ 3500) Physical EEROM Write And/Or Write Operations Failed. The EEROM Data That Is Written Does Not Match The Data That Is Read.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010110 (DJ 3500) The Content Of The Permanent Configuration Area Of The EEROM Is Not Valid When The Printer Is initialised In Service Mode.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010111 (DJ 3500) The Content Of The User Configuration Area EEROM Is Not Valid When The Printer Is initialised.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010120 (DJ 3500) The Content Of The Permanent Configuration Area Of The EERom Is Not Valid When Printer Is initialised In Normal Mode.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 010121 (DJ 3500) One Of The Banks Of The User Area Was Corrupted While Writing Or Reading In That Area.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 035000 (DJ 3500) Error In Finding The Primer Home Position.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 035001 (DJ 3500) Error In Finding The Elevator Home Position.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 035002 (DJ 3500) Error In Finding The Refill Arm Home Position.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 035003 (DJ 3500) Error In Finding The refill Stepper Motor Home Position.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 035004 (DJ 3500) Error In Finding The Service Station Home Position.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 035005 (DJ 3500) Elevator Has A Problem Reaching A Desired Position.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 035006 (DJ 3500) The Refill Position In The Y-axis is Not Calibrated.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 020010 (DJ 3500) Problem With Fine Movement of The Y-Axis Motor.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 020011 (DJ 3500) Error During Initialization Of The Y-Axis.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 040xxx (DJ 3500) MIO Card Error.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 040601 (DJ 3500) The MIO Card Does Not Support The MIO 6 Protocol Cards With Vision 5 Or Below Can Not Be Used With The Plotter. Version 5.1 Cards Behave As Expected But Does Not Support PML Instructions.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 050000 (DJ 3500) The Line Sensor Has Problems Finding The Mark Encoder.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 060000 (DJ 3500) The Line Sensor Is Not Functioning Properly Because There Is Too Much Ambient Light.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 060200 (DJ 3500) Incompatible Firmware And Carriage PCA.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 060399 (DJ 3500) Incompatible Firmware And Line Sensor.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 07xxxx (DJ 3500) Firmware Error.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 08xxxx (DJ 3500) PostScript Error.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 080001 (DJ 3500) Hard Disk Drive Installed Without PostScript.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 09xxxx (DJ 3500) Problem With The Hard Disk.
Designjet 2000 CP, 2500 CP, 2800 CP, 3000 CP, 3500 CP, 3800 CP Fehler 09004 (DJ 3500) PostScript Installed Without The Hard Disk Drive.
ausblenden